-
Look at the program. The operations of small CNC lathes are controlled by program instructions. By checking the program statements and program names, the problems that exist are identified and corrected in time.
-
Orientation angle running is generally caused by a collision machine, or the spindle synchronous tooth shape brings out a problem, resulting in an error in the orientation angle,
-
The processing sequence of the parts: first drilling the flat end (this is to prevent shrinkage when drilling);
-
The machining route of Shandong CNC lathe is the movement track and direction of the relative parts of the tool during the process of index-controlled lathe processing:
-
In the CNC lathe industry, accuracy is an important indicator of the performance of lathes. Whether it is the accuracy of tool control speed or tool position,
-
If there is a sudden stop phenomenon during the normal operation of the lathe, it is undoubtedly a significant fault that causes damage.
-
The choice of CNC system function should be based on practical, not necessarily too much, especially in the mass production line of equipment, the more simple the better, for more variety, small batch production machine tools to strengthen
-
1. It is not necessary to protect and maintain the CNC lathe for a long time: When the CNC lathe is idle, it should be energized by the CNC system.
-
1. Regularly add lubricating oil to the moving parts according to the frequency of use of the CNC lathe and the lubrication condition of the machine.
-
At present, the manufacturing industry has realized the development of science and technology, and various CNC machine tools have emerged.
-
CNC lathes are all active machining operations in processing products, but it is very important to grasp the standard during the processing operation.
-
The automatic CNC lathe runs 24 hours a day, and the hydraulic pump of the workbench does not stop working. After a long time, the hydraulic pump will inevitably cause certain wear.
